#Time lapse tool key manual#
#Time lapse tool key software#
#Time lapse tool key professional#

– So in order, for example, to produce a slow moving cloud time-lapse video of 3 min at 25 fps made up of 4,500 frames shot at 8 second intervals. – Exposure time in seconds x the number of images to record = total shooting time (in seconds). If your shoot isn’t subject to any time constraints, but you want to produce a time-lapse video calibrated to integrate another video, for example, you can calculate the total shooting time needed: – Example: For a one minute-video at 24 fps: 60 seconds x 24 fps = 1440 photos to take. – Running time of the time-lapse video (in seconds) x the fps of the final video = number of photos to shoo You can also evaluate the number of images to record based on the total duration of the desired recording and the frame rate of the final video: These calculations are very useful when you have limited shooting time, during a specific event, for example. You can then calculate the number of images you need to achieve this result: Total event time x 60 seconds per minute / interval = 150 x 60 / 3.1 = 2903 photos. 150 minutes), if you want to make a video of 2 minutes (120 seconds) at 24 fps, you must perform the following calculation: 150/120 x (60/24) = 3.1 seconds – For an event with a duration of 2h30 (i.e. The multiplying coefficient corresponds to 60 fps. – Total event duration (in minutes) / desired time-lapse time (in seconds) x multiplying coefficient. In order to determine the time interval you need between shots, you can also perform the following calculations: – 5 to 15 minutes: Projects under construction, slow-growing plants – 1 to 2 minutes: slow moving subjects, the rapid growth of an element – 10 to 30 seconds: the trajectory of the sun or the moon in calm weather – 1 to 2 seconds: fast moving subjects (pedestrians, traffic, clouds, etc.)

The exposure time must be chosen based on the subject to be photographed and the desired rendering, of which here is a non-comprehensive list for reference: Be careful, this time interval must be longer than the exposure time selected in order to give the camera time to record the image.

The main step is to define the time interval required between each shot. Time-lapse photography in an urban setting You can choose a random time interval and an approximate total duration, but you can also go the route of precision and anticipation with just a few calculations made up front. Good time-lapse photography means being prepared.

#Time lapse tool key software#

Keep in mind that you will need the right kind of computer and software to edit your video from the photos you took. Example of a remote-control Canon interval timer for EOS cameras If you don’t have one, you can opt for an external timer or a remote control that has one.

#Time lapse tool key professional#

It is usually built into mid-range and professional cameras. Lastly, you will need an intervalometer, or interval timer.

It needs to be very stable and well ballasted and not move in any way in order to produce quality time-lapse images.

Using a tripod to stabilize your camera is essential. Make sure you have a fully-charged battery and a high-capacity memory card (or ideally several) so you can to shoot for a long time and store all the images (especially if you shoot in RAW + JPG format). You can also use your smartphone if it is equipped with a dedicated application.

#Time lapse tool key manual#

© Ingo Doerrie / Unsplashįirst, you will need an adjustable camera in manual mode, preferably a hybrid or reflex type camera with a large Micro 4/3, APS-C or 24 x 36 mm type sensor in order to produce optimal image quality. Before you start, we recommend that you check to make sure you have all the required equipment. Having the right equipment is key in order to do beautiful time-lapse photography, otherwise you will have to deal with a lot of problems and you will waste a lot of time.